Show me your Gunpla

it's mine, and yeah, still can't decide. Would probably go for a close to the original color with some highlights if I do decide to paint it.

@satsugai - I was trying to build a custom version of project vicious IJ based on the resin kit

And for the X, i am just trying to make it look good, you know, to kick the old retro version of the HGish kit.


Today's Loot
00 Quan[T] Robot spirits

Why did you waste precious plastic crack money on a RD?

Why, what's wrong with Robert Danmachines?

spray at a distance of 20-30 cm, also avoid humid/moist environment, and don't overspray. Just do 2-3 thin coats

So now's the perfect time, with the dry environment. What about dust?

Should I coat > decal > line > coat?

decal + line -> coat everytime, also you may wanna use a empty box to prevent dirt from getting to your parts

decal + line -> coat everytime, also you may wanna use a empty box to prevent dirt from getting to your parts

Right, seems easypeast enough. Thanks.

Pros/cons of Flat vs. Gloss?

Flat makes the part appear rough, perfect for weathering and realistic appearance, Gloss on the other hand is great for metallics or candytone finish, wouldn't recommend using this when you're building something out of the box, unless you plan on doing an enamel wash for panel lining.

Thanks pops. Will post here when done.

@winter55 - because 00 quan[t].


Anyway, got around and had time building my XI Gundam. Demn it's big, almost as tall as the MG 1/100 Unicorn in Unicorn mode.


And nadleeh, the infamous "Gundam with hair" with an emo pilot.

The waist part of the Xi is utter shit. Gonna find a way to improve it.

@winter55 - I do agree about the waist part being awkwardly designed, however, the 1/100 counterpart is completely re-designed.

Anyway, My New loot

1/7 Yui Takamura Muv Luv Alternative


And My current WIP DS Ver.Ka


I should get a better compressor. >.

Finally done with this guy, after all the procrastination XD
This was the first time I actually painted splinters, and it wasn't very easy since I was using spray cans.

Mods made include the Zeta head, reshaped Kotobukiya thrusters/vents for the chest, and trimmed the crotch armor so that it could be attached upside down.

This thing is as heavy as heck, so I didn't even dare try to put it on an Action base. Well, the good thing is, it looks great just standing there. It's not a brick, but it's hard to pull off very dynamic poses with it.

That is one big epic kit. clean paint job and flawless execution.
I hate you :p


Anyway

Achievement Unlocked

-5 Gundams Confirmed. (pardon my background - i still have no place to shoot for a proper one)

Muh spoils of war from TOYCON 2015

You got another LP Full Burnern?

No, that's an old kit. What I got is the RG

00 Quant - my loot from toycon, i cant believe it took me 2 weeks to finish this kit.