We are currently experiencing payment processing issues. Our team is working to resolve the problem as quickly as possible. Thank you for your patience
Show me your Gunpla
0
the glory star wrote...
^Hey that's actually better now! The texture is a bit smoother compared to the Astraea, keep it up. And in other news, these guys finally came XD Yeeeyyy XD
Spoiler:
HOLY Shit, RESIN KIT!?! Did the customs charged you like a big bang for that?
or did you buy it inside the country?
Thanks though. i actually took my time for that guy. :D since i have limited hours to work with it.
0
bobing wrote...
winter55 wrote...
Satsugai wrote...
http://www.gunjap.net/site/?p=86031GF13-050NSW Nobell Gundam: “RemOOdeled”
>DAT CHEST
>DAT WAIST
Good god what are they doing?
I see that gundam being raped by the tentacles of the Dark/Devil Gundam.
and the pilot too.
i wonder what the Berserker mode looks like.
edit
---------------
Got that white finish that i've been experimenting lately
Spoiler:
care to tell how'd you do that white?
0
winter55 wrote...
edit
---------------
Got that white finish that i've been experimenting lately
Spoiler:
care to tell how'd you do that white?
Primer Gray + Fluorescent Flat white, as base.
it should look like this. (planning to do this on my DS Ver.Ka in the future)
Spoiler:
and add White. then viola. coat it with gloss.
before painting, do some sanding, at least 800-1200 grits will do.
just to remove imperfections and unnecessary molds and bumps that comes along with it.
0
bobing wrote...
winter55 wrote...
edit
---------------
Got that white finish that i've been experimenting lately
Spoiler:
care to tell how'd you do that white?
Primer Gray + Fluorescent Flat white, as base.
it should look like this. (planning to do this on my DS Ver.Ka in the future)
Spoiler:
and add White. then viola. coat it with gloss.
before painting, do some sanding, at least 800-1200 grits will do.
just to remove imperfections and unnecessary molds and bumps that comes along with it.
does Pylox have that florescent white?
0
winter55 wrote...
bobing wrote...
winter55 wrote...
edit
---------------
Got that white finish that i've been experimenting lately
Spoiler:
care to tell how'd you do that white?
Primer Gray + Fluorescent Flat white, as base.
it should look like this. (planning to do this on my DS Ver.Ka in the future)
Spoiler:
and add White. then viola. coat it with gloss.
before painting, do some sanding, at least 800-1200 grits will do.
just to remove imperfections and unnecessary molds and bumps that comes along with it.
does Pylox have that florescent white?
that i do not know, the paints that i used where all Bosny/RJ London in brand.
it's kinda tricky to apply.
0
bobing wrote...
winter55 wrote...
bobing wrote...
winter55 wrote...
edit
---------------
Got that white finish that i've been experimenting lately
Spoiler:
care to tell how'd you do that white?
Primer Gray + Fluorescent Flat white, as base.
it should look like this. (planning to do this on my DS Ver.Ka in the future)
Spoiler:
and add White. then viola. coat it with gloss.
before painting, do some sanding, at least 800-1200 grits will do.
just to remove imperfections and unnecessary molds and bumps that comes along with it.
does Pylox have that florescent white?
that i do not know, the paints that i used where all Bosny/RJ London in brand.
it's kinda tricky to apply.
Hmmmm... Gonna ask them this week end then... I'll prolly use Tamiya acrylic flat white for the top layer since I have access to an air brush now.
0
Gahald_Mills wrote...
Spoiler:
I'm getting this guy. Maybe tomorrow I'll order it.
one of the movies that i can't watch in theater because it's in the other region of the city and only plays at that cinema.
0
winter55 wrote...
bobing wrote...
winter55 wrote...
bobing wrote...
winter55 wrote...
edit
---------------
Got that white finish that i've been experimenting lately
Spoiler:
care to tell how'd you do that white?
Primer Gray + Fluorescent Flat white, as base.
it should look like this. (planning to do this on my DS Ver.Ka in the future)
Spoiler:
and add White. then viola. coat it with gloss.
before painting, do some sanding, at least 800-1200 grits will do.
just to remove imperfections and unnecessary molds and bumps that comes along with it.
does Pylox have that florescent white?
that i do not know, the paints that i used where all Bosny/RJ London in brand.
it's kinda tricky to apply.
Hmmmm... Gonna ask them this week end then... I'll prolly use Tamiya acrylic flat white for the top layer since I have access to an air brush now.
well, its your choice, but if you are looking for a clean finish, then you could use a normal white paint, apply decals, panel lines and coat it with Flat.
flat white, is somewhat bothersome to clean up, i applied panel wash on it. and it's a pain in the ass to get the excess paint off. well, if you are going for a dirty/weathered/smoked look, then i suggest go with flat white on top.
0
bobing wrote...
winter55 wrote...
bobing wrote...
winter55 wrote...
bobing wrote...
winter55 wrote...
edit
---------------
Got that white finish that i've been experimenting lately
Spoiler:
care to tell how'd you do that white?
Primer Gray + Fluorescent Flat white, as base.
it should look like this. (planning to do this on my DS Ver.Ka in the future)
Spoiler:
and add White. then viola. coat it with gloss.
before painting, do some sanding, at least 800-1200 grits will do.
just to remove imperfections and unnecessary molds and bumps that comes along with it.
does Pylox have that florescent white?
that i do not know, the paints that i used where all Bosny/RJ London in brand.
it's kinda tricky to apply.
Hmmmm... Gonna ask them this week end then... I'll prolly use Tamiya acrylic flat white for the top layer since I have access to an air brush now.
well, its your choice, but if you are looking for a clean finish, then you could use a normal white paint, apply decals, panel lines and coat it with Flat.
flat white, is somewhat bothersome to clean up, i applied panel wash on it. and it's a pain in the ass to get the excess paint off. well, if you are going for a dirty/weathered/smoked look, then i suggest go with flat white on top.
Nawwwwww, I've learned from past mistakes and I'll make sure to gloss coat it first before I apply panel lines and decals.
0
bobing wrote...
Next stop Decals.List of paints used
Spoiler:
dayum, that's alot of paint...
EDIT:
Pylox is thin as fuck, surface is smooth, but somewhat it's not the right kind of white I really want on my Unicorn...
0
just posting some Gundam related pics that i took at C82 Comic Market
also this saturday,i'm gonna go to this year's Chara Hobby.
expect more pics after that day if i'm not too lazy to pot it.lol.
Spoiler:
also this saturday,i'm gonna go to this year's Chara Hobby.
expect more pics after that day if i'm not too lazy to pot it.lol.
0
A Legendary Bandai Gunpla Designer Retires
http://gundamguy.blogspot.com/2012/08/a-legendary-bandai-gunpla-designer.html
0
Satsugai wrote...
A Legendary Bandai Gunpla Designer Retires
http://gundamguy.blogspot.com/2012/08/a-legendary-bandai-gunpla-designer.html
god bless you Zaku-san,you really are one of the pioneer who creates the world of Gunpla.
one time when i accidentally watched a tv special where three guys went to Bandai Hobby Center,they have a chance to meet zaku-san in person and surprisingly,Zaku-san still kept the wooden model prototype for the first RX-78-2 Gundam model inside his desk.that alone is awesome to see the wooden prototype still in mint condition.
0
Remember the sexy Frame Arms that I posted back then? Well my friend,
it will be released on December 2012.
YSX-24 Basflard
Spoiler:
it will be released on December 2012.
YSX-24 Basflard
