Show me your Gunpla

^I am kinda pissed and happy at the same time about the MG Nu ver Ka. And I just recently got the Evolve conversion parts for the old MG too T_T Regardless, it's still on my hit list, it would be even better if they give it the HWS parts in the future (That would be a bigger driving force for me to get it).

well, it's nice bandai released the Evolve Version of NU, though, i was sure that it was next to zero for them on releasing it. Age-2, damn, i don't know why, but i love that design, maybe i should get some Crossbone X1, and X-Bone fullcloth. Dark Colored Gundams are not ugly. :D

Pylox is horrible. Is bosny any better?

Can you tell in what way does it suck? I've been using Pylox 3 years already and I haven't even encountered problems with it yet (well of course I did encounter some problems when I was a beginner of course XD. This is my first work and I actually used Bosny on it http://i485.photobucket.com/albums/rr217/wildflug/zaku.png , the rose pink parts are Bosny paints, while the darker pink is Pylox. Yes I know it's horri-bad XD ), many people who have seen my newer models say that they're quite nice and smooth (Yes, I use Bosny sparingly in that 3 year span as well)

In what way do you expect bosny to be better? Would you care to elaborate on that part?

Edit again: I think this is a very good example of a paint combo using 3 kinds of industrial paint brands (Pylox, Bosny and TOA). (He could have fixed that seam on the rifle though ^_^)

http://www.mech9.com/blog/2010/09/1100-gn-006-cherudim-gundam-finished-shots/2/

the white I bought is somewhat cream in color. Not the type of white I had in mind, and the label says pure white. D: Although the finish of pylox is smoother than bosny...

^ Oh I see...Then you can try Pylox Angel White, that's what I always use, check my sig. Angel white is what I used on the Turn A. Or if you still not satisfied go for Bosny then ^_^

Or you can try again, but this time shake that can of pylox nicely for at least 3 minutes. Or at least go for a newer can next time.

It's all about experiments the first time around, so don't lose heart.

3 mins? that long? sweet jesus... lemme try wait.

The can actually says only 30 seconds, but I shake it up to 3 minutes: tops, especially when I didn't get to use the can for a very long time (my cans stay dormant up to 6 months!),I do this even after dipping the cans in warm water.

I noticed the white got a bit better... But still, I may go for a bosny undercoat for this just to make the white better. After all, pylox is pretty thin.

^ Bosny over Pylox or vice versa will give you bad effects. I just experienced that not too long ago (though TOA over Pylox works fine)

But I'm not stopping you from trying since you're using white and might render different results. In my case I used white pylox then I topped it with Bosny orange in an attempt to give the orange a lighter tone, and they kind of reacted badly. Then again the two brands are of different formulations, so that might explain the bad reaction.

Though I would be very interested in what kind of results you might yield if you go through with that, as I'm still learning as well ^_^.

If you're still not satisfied with what you got after all that shaking,ditch that can entirely and go for another kind of Pylox white or switch to Bosny.

Don't go for bosny white, if you plan on using it on bare plastic itself, Bosny White. lacks the pigment it need to cover the coats. though it is very tricky to apply. trust me, after experimenting a lot of it.

Pylox and toa are way better than bosny, i just use it, because it's cheap, and i can get them for a wholesale price anytime i want. :D. though, painting kits with spraycans is a hassle, maybe i'll get an upgrade and buy a Compressor one of these days.
just to make my AB to get to work, and i cant get my nebulizer to work properly. >.>

Where can I find TOA? And I'm gonna primer the kit so that should help.

Pylox and toa are available on Ace hardware. and if you cant still find it, then go to Handyman, it's somewhere in trinoma.

I shop in UST. It's like 133 there, and 95 for bosny, well I'll try ACE hardware then

a new series by Tomino.
http://gundamguy.blogspot.jp/2012/08/tomino-yoshiyukis-new-project-g-reko.html
the series's titled as "G Reko" and if you're reading his comment,he says that this is NOT A GUNDAM series but an entirely new mecha series.

even so,the design is pretty much a slimed Gundam if you ask me.

I tried out the paint on an actual part of a unicorn gundam (extra piece from the runner) and it actually looks nice. the finish is sleek and it isn't all so creamy after all.

here's the C3XHobby pics that i took yesterday.
even though some of the pics might not have anything about the event but you can let it slide.lol.

@FOGGY - That Ultra deformed zaku. >.> so i guess you had a blast seeing those plamos. specially that 1/144 shambloo. :D
and that hrairoo, makes me want to throw mine,

so took this photo...



I painted the blue there...



can't wait to disassemble it and repaint everything...

Its not much, but here's my 1/144 Vayeate. I hand brushed it, and replaced the cord on it with a wire. Made the effort so it wouldn't look like how most 90s kits end up.
I may weather it soon.